How to Set Up Emporia EV Charger (48A)

Intermediate 30-60 minutes (after electrical installation)

What You'll Need

  • Emporia EV Charger (48A)
  • 240V/60A circuit (for 48A charging)
  • Professional electrical installation
  • Emporia app on smartphone
  • WiFi network (2.4GHz)

Step-by-Step Setup

  1. Electrical installation: Have electrician install 60A circuit and NEMA 14-50 outlet or hardwire connection.
  2. Mount charger: Attach mounting bracket to wall at comfortable height.
  3. Connect power: Plug into NEMA 14-50 outlet or have electrician hardwire.
  4. Download Emporia app: Install and create account.
  5. Power on charger: Status light indicates ready state.
  6. Enter pairing mode: Hold button on charger until WiFi indicator flashes.
  7. Add in app: Tap "Add Device" and select EV Charger.
  8. Connect WiFi: Enter 2.4GHz network credentials.
  9. Configure amperage: Set maximum charging rate based on your circuit.
  10. Set up schedules: Create charging schedules for off-peak rates.

Key Features

  • 48A/240V: Up to 11.5kW charging, adds ~37 miles range per hour
  • Budget friendly: Lower cost than many Level 2 chargers
  • Energy monitoring: Track charging costs with Emporia ecosystem
  • Scheduled charging: Automatically charge during off-peak hours
  • Load management: Works with Emporia Vue energy monitor
  • 25ft cable: Long reach for flexible parking positions

Troubleshooting

  • Not charging: Check circuit breaker. Verify outlet has power.
  • Slow charging: Confirm amperage setting matches circuit capacity.
  • WiFi issues: Only 2.4GHz supported. Check signal at charger location.
  • App shows offline: Power cycle charger. Reconnect to WiFi.
  • Error codes: Consult app or manual for specific error meanings.