What You'll Need
- Roborock Qrevo Curv
- Multifunctional dock
- Roborock app
- 2.4GHz WiFi network
Step-by-Step Setup
- Position the dock: Place against a wall with 0.5m clearance on sides and 1m in front.
- Connect dock utilities: Plug in power. Fill clean water tank.
- Prepare the robot: Remove all packaging and protective materials.
- Install side brush: Attach the side brush to the underside.
- Install mop pads: Attach the rotating mop modules.
- Dock the robot: Place Qrevo Curv on the charging dock.
- Download Roborock app: Install on your smartphone.
- Add device: Tap "+" and select Qrevo Curv. Follow setup instructions.
- Connect to WiFi: Enter your 2.4GHz network credentials.
- Run mapping clean: Start a full home clean to generate the floor map.
- Configure rooms: Edit room names and boundaries in the app.
- Set cleaning routines: Schedule regular cleaning times.
Key Features
- Adaptive FlexiArm curved design for edge cleaning
- 18,500Pa suction power
- Dual rotating mops
- Hot water mop washing
- Auto-empty dustbin
- LiDAR navigation with 3D mapping
- Alexa, Google Home, Siri support
Troubleshooting
- FlexiArm not extending: Check for debris blocking the arm mechanism.
- Missing edges: FlexiArm needs calibration. Run edge cleaning mode.
- Mop too wet/dry: Adjust water flow settings in the app.
- Not docking properly: Clean dock sensors. Ensure clear path.
Was this guide helpful?