What You'll Need
- SwitchBot S10 robot
- Auto-Empty Station
- Water Station (connects to plumbing)
- SwitchBot app
- 2.4GHz WiFi network
- Access to water supply and drain
Step-by-Step Setup
- Position Auto-Empty Station: Place against wall with adequate clearance.
- Install Water Station: Mount near a water supply (under sink, utility room, etc.).
- Connect water lines: Attach the water inlet to a supply line and outlet to a drain.
- Plug in both stations: Connect power to both the Empty Station and Water Station.
- Remove robot packaging: Take off all protective materials.
- Install roller mop: Attach the RevoRoll roller mop to the robot.
- Dock the robot: Place on the Auto-Empty Station to charge.
- Download SwitchBot app: Install on your smartphone.
- Create account: Sign up for SwitchBot.
- Add robot: Tap "+" and select S10. Follow pairing instructions.
- Add Water Station: Pair the Water Station in the app as well.
- Configure routing: Set the robot's path between stations on the map.
- Run first clean: Start cleaning to create a map.
- Test water cycle: Verify robot visits Water Station for refill/drain.
Key Features
- Automatic water refill and drain
- RevoRoll self-cleaning mop
- 6,500Pa suction
- Auto-empty (4L dustbin)
- Dual LiDAR + AI camera navigation
- Matter compatible
- No manual water tank maintenance
Troubleshooting
- Water not filling: Check supply line connection. Verify water valve is open.
- Drain not working: Ensure drain line isn't kinked. Check for clogs.
- Robot can't find Water Station: Verify stations are mapped. Robot needs clear path between them.
- RevoRoll streaking: Run extra cleaning cycle at Water Station to clean the roller.
Was this guide helpful?