What You'll Need

Step-by-Step Setup

Charge the camera: Connect the USB-C cable to the back of the camera and plug into power. Charge fully before installation—the status light pulses white while charging and turns solid white when complete (about 5 hours).
Open the Google Home app: Download if needed and sign in to your Google account.
Add the camera: Tap "+" → "Set up device" → "New device." Select your home.
Scan the QR code: Point your phone at the QR code on the back of the camera or on the cable.
Connect to Wi-Fi: Select your network and enter the password. The camera supports both 2.4GHz and 5GHz bands.
Choose location: Select where the camera will be placed (Indoor or Outdoor) and give it a name.
Set up features: Configure activity zones, notification preferences, and Familiar Face detection if you have Nest Aware.
Mount the camera: Attach the metal wall plate with screws (included). The camera connects magnetically to the plate for easy positioning and removal for charging.
Adjust the angle: Use the live view in the app to fine-tune the camera position.

Camera won't set up: Ensure Bluetooth is enabled on your phone. Move closer to the camera during setup. Restart the camera by pressing and holding the button for 10 seconds.
Wi-Fi connection issues: Check signal strength at camera location. Try connecting to 2.4GHz if 5GHz is weak. Ensure router firmware is up to date.
Battery draining quickly: High-traffic areas drain battery faster. Reduce detection sensitivity. Use wired power adapter for areas with frequent motion.
Missing notifications: Check Google Home app notification settings. Ensure camera's detection settings are properly configured. Verify phone's Do Not Disturb isn't blocking alerts.
Status light meanings: Pulsing white = charging. Solid white = fully charged. Spinning white = starting up. Solid green = recording/streaming.