What You'll Need

Step-by-Step Setup

Charge the battery: Connect the USB cable to the battery pack and charge fully before installation (approximately 8 hours).
Measure and mark: Measure your window frame and mark where the mounting brackets will go. Use a level for accuracy.
Install brackets: Secure the mounting brackets using the included screws. Ensure they're level.
Insert battery pack: Slide the charged battery into the roller blind mechanism.
Hang the blind: Click the roller blind into the brackets.
Test manual operation: Use the included remote or buttons on the motor to test up/down movement.
Open IKEA Home Smart app: Navigate to your hub and tap "Add device."
Pair the blind: Press the pairing button on the blind motor. Follow app prompts to complete pairing.
Set limits: Calibrate the up and down positions in the app.
Add to Matter (optional): With DIRIGERA, share to your Matter controller.

Blind won't move: Check battery charge level. Ensure battery is properly inserted. Try resetting by removing and reinserting battery.
Uneven movement: Check that brackets are level. Ensure blind is properly seated in both brackets.
Not pairing: Press pairing button for 5 seconds. Move blind closer to hub. Ensure hub is in pairing mode.
Position limits wrong: Recalibrate in app. Run the blind to each end position and save.
Battery draining fast: Frequent use decreases battery life. Consider IKEA solar panels for continuous charging.