What You'll Need

Step-by-Step Setup

Turn off the light fixture: Ensure the fixture is switched off before installing.
Install the bulb: Screw the E12 Essentials bulb into the candelabra socket.
Turn on power: Switch on the light fixture. The bulb will illuminate and enter pairing mode (may pulse).
Open your Matter controller app: Apple Home, Google Home, or other Matter-compatible app.
Add new device: Tap "+" and select "Add Accessory" or "Add Device."
Scan Matter code: Find the Matter QR code or numeric code on the bulb packaging and scan it.
Wait for connection: The bulb will connect via Thread to your border router.
Assign room: Place the bulb in the appropriate room in your smart home.
Test controls: Turn on/off, dim, and change colors using your app.

Bulb not pairing: Ensure Thread border router is online. Turn bulb off/on 3 times quickly to reset pairing mode. Scan code carefully.
Bulb offline: Check Thread network status. Power cycle the bulb. Ensure border router is within range.
Color inaccurate: Adjust color in app settings. Some colors may appear different due to E12's smaller form factor.
Dimming not smooth: Ensure fixture's switch is fully on (not dimmed). The bulb handles dimming—physical dimmer switches can interfere.
Pairing code not working: Use the code exactly as printed. Try manual entry if scanning fails. Reset bulb and try again.