How to Set Up Your Ring Alarm Flood & Freeze Sensor

What You'll Need

• Ring Alarm Flood & Freeze Sensor
• Ring Alarm Base Station (required)
• Ring app (iOS/Android)
• Ring account

Step-by-Step Setup

1. Ring Alarm required: Base station must be set up
2. Open Ring app: Devices → Add Device → Security Devices
3. Select sensor: Choose "Flood & Freeze Sensor"
4. Pull battery tab: Activate the sensor
5. Wait for pairing: Base station discovers sensor
6. Name and configure: Give it a name
7. Place sensor: Set on floor in water-prone areas
8. Test: Pour small amount of water near probes to test

Key Features

• Dual sensing: Detects both water leaks and freezing temps
• Freeze alerts: Warns when temperature drops below 40°F (4°C)
• Water detection: Contact probes detect water
• Ring ecosystem: Full integration with Ring Alarm
• Professional monitoring: Alerts monitoring service (if subscribed)
• Z-Wave connection: Reliable wireless to base station

Troubleshooting

• Freeze false alarms: Don't place near cold drafts or AC vents
• Water not detected: Ensure probes are clean and touching the floor
• Offline: Check base station connection. May need Range Extender
• Temperature accuracy: Allow 30 minutes to acclimate after placement
• Reset: Remove battery, hold tamper button, reinsert