How to Set Up Your Ring Flood Freeze Sensor

Beginner 10-15 minutes

What You'll Need

  • Ring Flood & Freeze Sensor
  • Ring Alarm Base Station (2nd Gen)
  • Smartphone with Ring app
  • Ring account
  • 2 AAA batteries (included)

Step-by-Step Setup

  1. Ensure Ring Alarm is set up: Your Ring Alarm Base Station must be online and connected.
  2. Insert batteries: Open the sensor and insert 2 AAA batteries.
  3. Open Ring app: Navigate to Devices → Alarm Base Station → "+" to add device.
  4. Select Flood & Freeze Sensor: Choose from the device list.
  5. Follow pairing prompts: The app will guide you through connecting the sensor to your Base Station.
  6. Wait for connection: Sensor connects via Z-Wave to the Base Station.
  7. Position the sensor: Place on the floor near potential water sources (water heater, washing machine, under sinks).
  8. Test the sensor: Place a few drops of water on the probes to verify detection.
  9. Configure alerts: Set up notification preferences for water and freeze detection.

Key Features

  • Water leak detection
  • Freeze temperature alerts (below 40°F/4°C)
  • Z-Wave connection to Ring Alarm
  • Battery powered
  • Push notifications
  • Works with Ring ecosystem
  • Professional monitoring integration
  • Compact design

Troubleshooting

  • Not pairing: Ensure Base Station is online. Move sensor closer during pairing. Check batteries are properly installed.
  • Not detecting water: Probes must contact water. Place flat on floor. Clean probes if dirty.
  • False freeze alerts: Verify sensor isn't near AC vents or cold drafts. Check actual room temperature.
  • No notifications: Check Ring app notification settings. Verify phone allows Ring notifications.
  • Battery warning: Replace both AAA batteries. Use quality alkaline batteries.