How to Set Up Your TOPGREENER Z-Wave Plus In-Wall Outlet

What You'll Need

• TOPGREENER Z-Wave Plus In-Wall Outlet
• Z-Wave smart home hub (SmartThings, Hubitat, etc.)
• Neutral wire at outlet box
• Screwdriver and voltage tester

Step-by-Step Setup

1. Turn off power at the circuit breaker
2. Verify power is off with voltage tester
3. Wire the outlet:
   • Connect hot (black) to line terminal
   • Connect neutral (white) to neutral terminal
   • Connect ground to ground terminal
4. Install in electrical box and attach cover plate
5. Restore power
6. Add to Z-Wave hub:
   • Put hub in inclusion mode
   • Press outlet button once
   • LED flashes during pairing
   • Hub confirms when paired

Key Features

• Z-Wave Plus 500 series chip
• Works as Z-Wave repeater
• Split outlet design
• LED indicator
• S2 security support
• Compatible with any Z-Wave hub

Troubleshooting

• Won't pair: Exclude first, then try including
• Factory reset: Press button rapidly 5 times, hold until LED flashes
• LED not working: Check neutral wire connection
• Poor range: Add more Z-Wave devices to mesh