Installing Your Lockly Vision Elite Smart Lock with Video Doorbell

What You'll Need

• Lockly Vision Elite
• Phillips head screwdriver
• Drill (for doorbell wiring if needed)
• 8 AA batteries or existing doorbell wiring (16-24V AC)
• Smartphone with Lockly app
• 2.4GHz WiFi network

Step-by-Step Setup

1. Download Lockly app: Install and create your account.
2. Remove existing deadbolt: Unscrew and remove current lock hardware.
3. Install latch assembly: Insert the deadbolt latch into the door.
4. Choose power method: Use existing doorbell wiring (16-24V AC) or battery pack.
5. Mount exterior assembly: Position the combined video doorbell/lock outside. Connect wiring if applicable.
6. Install interior assembly: Attach and secure the interior unit.
7. Install batteries (if not wired): Insert 8 AA batteries for the video and lock.
8. Add device in app: Follow in-app instructions to pair the lock and camera.
9. Connect to WiFi: Enter your 2.4GHz network credentials.
10. Configure video settings: Set motion zones, notification preferences, and recording options.
11. Set up access methods: Register fingerprints and create PIN codes.

Key Features

• Integrated video doorbell with smart lock
• PIN Genie shuffling keypad
• 3D fingerprint sensor
• 1080p HD video with two-way audio
• Motion detection alerts
• Night vision
• Video recording (cloud subscription available)
• Remote unlock while viewing visitor
• Works with Alexa and Google Assistant

Troubleshooting

• Video not connecting: Check WiFi signal strength at door. Consider WiFi extender.
• Battery draining fast: Reduce video quality or motion sensitivity. Use wired power if possible.
• Motion alerts too frequent: Adjust motion zones and sensitivity in app.
• Lock and camera out of sync: Restart both components through the app.