Installing Your Mysa Smart Thermostat V2

Intermediate 30-45 minutes

What You'll Need

  • Mysa Smart Thermostat V2
  • Mysa app (iOS or Android)
  • Wi-Fi network
  • Electric heating system (baseboard, convector, fan-forced)

Step-by-Step Setup

  1. Turn off power at circuit breaker
  2. Confirm power is off with voltage tester
  3. Remove old thermostat
  4. Connect Mysa V2:
    • LINE wires to LINE terminals
    • LOAD wires to LOAD terminals
    • Ground to ground terminal
  5. Secure to wall box
  6. Restore power
  7. Open Mysa app and add device
  8. Connect Wi-Fi and configure settings

Key Features

  • Updated design with improved display
  • Works with high-voltage electric heating
  • Alexa, Google, Apple HomeKit compatible
  • Energy tracking and insights
  • Scheduling and away modes
  • Multi-zone management
  • Touch controls

Troubleshooting

  • Installation: High-voltage - electrician recommended
  • Heater not responding: Verify line/load wiring
  • Wi-Fi issues: Use 2.4GHz network
  • Factory reset: Through Mysa app device settings