Installing Your Philips Hue Dimmer Switch V2

Beginner 20-30 minutes

What You'll Need

  • Philips Hue Dimmer Switch V2
  • Philips Hue Bridge (required)
  • Smartphone with Philips Hue app
  • Hue lights to control
  • CR2450 battery (included)

Step-by-Step Setup

  1. Remove battery tab: Pull the plastic tab to activate the battery.
  2. Open Hue app: Ensure Hue Bridge is set up and lights are added.
  3. Add accessory: Go to Settings > Accessories > Add accessory.
  4. Select Hue Dimmer Switch: Choose from the list of accessories.
  5. Put in pairing mode: Hold the Setup button on back until LED blinks orange.
  6. Pair: App will find and add the dimmer switch.
  7. Assign to room: Select which room/lights the dimmer controls.
  8. Customize buttons: Configure what each button does in app settings.
  9. Mount: Use adhesive plate or screws to mount on wall.

Key Features

  • 4 buttons: On, Brighter, Dimmer, Off
  • Fully customizable button actions
  • Control multiple rooms or scenes
  • Magnetic detachable from wall plate
  • 3-year battery life
  • Works as portable remote or wall switch
  • Hue Button press and hold actions
  • Controls up to 10 lights or entire zones

Troubleshooting

  • Not discovered: Ensure dimmer is near Bridge during pairing. Reset by holding all 4 buttons for 10 seconds.
  • Slow response: Check Zigbee mesh strength. Add Hue bulbs to improve connectivity.
  • Wrong lights responding: Reconfigure room/light assignment in app.
  • Button customization: Use Hue Labs or third-party apps for advanced configurations.