Hunter Ceiling Fan Controller Not Working

Hunter SIMPLEconnect ceiling fans include WiFi control for fan speed and lights. This guide covers connectivity and control issues.

Fan Not Connecting to WiFi

Symptoms

  • Fan not found in app
  • WiFi setup fails
  • Light blinks but won't connect

Solutions

  1. Use Hunter app - Download SIMPLEconnect app for setup.
  2. 2.4GHz network - Only supports 2.4GHz WiFi.
  3. Pairing mode - Hold fan light button until light blinks rapidly.
  4. Power cycle - Turn off at wall switch, wait 30 seconds, turn on.
  5. Reset fan module - Some models have reset button on receiver.

Fan Speed Not Controlling

Symptoms

  • Speed commands ignored
  • Only off and high work
  • Fan runs at wrong speed

Solutions

  1. Speed levels - Verify fan supports the speed levels you're requesting.
  2. App control - Use app slider for precise speed control.
  3. Voice commands - "Set fan to low/medium/high" or percentage.
  4. Receiver issue - If unresponsive, check wiring to receiver module.

Light Control Issues

Symptoms

  • Light not responding
  • Dimming not working
  • Light and fan respond together

Solutions

  1. Separate control - Fan and light should be independently controllable.
  2. Dimmer compatibility - Some fan lights support dimming; others are on/off only.
  3. Bulb type - Use compatible bulbs as specified in fan documentation.
  4. App settings - Configure light settings in SIMPLEconnect app.

Voice Control

Symptoms

  • Alexa/Google can't find fan
  • Voice commands not understood
  • HomeKit not working

Solutions

  1. Link account - Enable Hunter SIMPLEconnect skill in Alexa or Google Home.
  2. Discover devices - After linking, discover new devices.
  3. HomeKit - HomeKit support requires HomeKit-compatible model.
  4. Name clearly - Use simple name like "Bedroom Fan".

Remote Control Conflicts

Symptoms

  • Physical remote interferes with WiFi control
  • Random speed changes
  • Neighbor's fan affecting yours

Solutions

  1. Frequency dip switches - Set unique frequency on receiver and remote.
  2. Use WiFi only - Consider not using RF remote if WiFi works.
  3. Separate frequencies - Ensure different frequency than neighbor's fan.