How to Set Up the Jackery Solar Generator 3000 Pro

What You'll Need

• Jackery Explorer 3000 Pro power station
• Jackery SolarSaga panels (optional)
• Jackery app
• 2.4GHz WiFi network

Step-by-Step Setup

1. Unbox the unit: Remove Explorer 3000 Pro and accessories.
2. Initial charge: Charge to 50-80% before first use using AC or solar.
3. Power on: Press the main power button. Display will illuminate.
4. Download Jackery app: Install on your smartphone.
5. Create account: Sign up for Jackery.
6. Connect via Bluetooth: Enable Bluetooth on your phone and pair with the unit.
7. Connect to WiFi: Enter your 2.4GHz network credentials in the app.
8. Set up solar panels (if using): Unfold and position SolarSaga panels toward the sun.
9. Connect panels: Use the included cables to connect panels to the power station.
10. Monitor in app: View charging rate, battery level, and output usage.
11. Configure settings: Set charging limits and eco modes.

Key Features

• 3024Wh capacity
• 3000W output (6000W surge)
• Charges 0-80% in 2.4 hours (AC)
• Solar charging up to 1400W
• App monitoring and control
• Quiet operation (30dB)
• 10-year lifespan

Troubleshooting

• Solar not charging: Check panel connections. Ensure direct sunlight.
• Overload error: Connected devices exceed 3000W. Reduce load.
• App not connecting: Try Bluetooth first, then WiFi. Check both are enabled.
• BMS error: Battery management system alert—let unit cool and restart.