How to Set Up Petcube Bites 2

Beginner 15-25 minutes

What You'll Need

  • Petcube Bites 2
  • Standard electrical outlet
  • Pet treats (various sizes supported)
  • Petcube app on smartphone
  • WiFi network (2.4GHz or 5GHz)

Step-by-Step Setup

  1. Position camera: Place on shelf or table with clear view of room where pet spends time.
  2. Connect power: Plug in power cable and connect to outlet.
  3. Download Petcube app: Install and create account or sign in.
  4. Add device: Tap "+" and select Petcube Bites 2.
  5. Enable pairing: Camera automatically enters setup mode when first powered on.
  6. Connect WiFi: Select your network and enter password.
  7. Fill treat dispenser: Open top lid and add treats. Supports various sizes.
  8. Set treat distance: Adjust how far treats are flung in app settings.
  9. Configure Alexa: Optionally enable built-in Alexa by signing in.
  10. Test features: Try two-way audio and treat dispensing.

Key Features

  • 1080p HD with 160° view: Wide-angle camera captures more of the room
  • Treat dispenser: Flings treats up to 6 feet
  • Built-in Alexa: Acts as Alexa speaker when home
  • Sound and motion alerts: Know when pet is active
  • Two-way audio: Talk to your pet remotely
  • Night vision: See clearly in the dark

Troubleshooting

  • Treats won't dispense: Check treats aren't stuck. Use appropriately sized treats.
  • Camera offline: Verify WiFi connection. Power cycle the device.
  • Alexa not responding: Sign into Alexa in app settings. Check microphone isn't muted.
  • Poor video quality: Check internet speed. Reduce video quality setting if needed.
  • Motion alerts too frequent: Adjust motion sensitivity in app settings.