How to Set Up Your ConnectSense Smart In-Wall Outlet

What You'll Need

• ConnectSense Smart In-Wall Outlet
• Apple Home app (HomeKit native)
• 2.4GHz Wi-Fi network
• Neutral wire at outlet box
• Screwdriver and voltage tester

Step-by-Step Setup

1. Turn off power at the breaker
2. Install outlet wiring:
   • Connect hot (black) to line terminal
   • Connect neutral (white) to neutral terminal
   • Connect ground to ground terminal
3. Mount and install cover plate
4. Restore power
5. Add to Apple Home:
   • Open Apple Home app
   • Tap "+" → "Add Accessory"
   • Scan the HomeKit code on the outlet or packaging
   • Assign to a room and name the outlets

Key Features

• Native Apple HomeKit support (no hub required)
• Two independently controllable outlets
• Energy monitoring for each outlet
• Wi-Fi connected
• Siri voice control
• HomeKit automations and scenes

Troubleshooting

• HomeKit code not scanning: Manually enter the code from the label
• Shows "No Response": Check Wi-Fi connection; ensure on 2.4GHz
• Energy monitoring not working: May take a few minutes to populate data
• Factory reset: Hold both outlet buttons simultaneously for 10 seconds