How to Set Up Your Geeni Surge Smart Wi-Fi Surge Protector

What You'll Need

• Geeni Surge Smart Wi-Fi Surge Protector
• Geeni app (iOS/Android)
• 2.4GHz Wi-Fi network
• Geeni account

Step-by-Step Setup

1. Check surge protection: Verify the "Protected" LED indicator is on when plugged in
2. Plug in the surge protector: Connect to a grounded wall outlet
3. Download Geeni app: Install from App Store or Google Play
4. Create account: Sign up or log in to your Geeni account
5. Add device: Tap "+" → "Add Device" → select your surge protector model
6. Enter pairing mode: Hold the power button until LED blinks rapidly
7. Connect to Wi-Fi: Enter your 2.4GHz network credentials
8. Finish setup: Name the device and individual outlets

Key Features

• Surge protection: Protects electronics from voltage spikes
• Protection indicator: LED shows active surge protection status
• Individual outlet control: Manage each outlet separately
• USB ports: Built-in USB charging ports
• Voice control: Works with Alexa and Google Assistant
• Scheduling: Set on/off schedules for each outlet

Troubleshooting

• Protected LED off: Surge protection is depleted. Replace the surge protector
• Can't find device: Ensure phone is on 2.4GHz network during setup
• Pairing keeps failing: Try AP mode - hold button until LED blinks slowly, then manually connect to "Geeni_XXXX"
• Alexa can't discover: Enable the Geeni skill in Alexa app, then discover devices
• Factory reset: Hold power button 10+ seconds until LED flashes rapidly