How to Set Up Your GHome Smart Power Strip (4 Outlet + 4 USB)

What You'll Need

• GHome Smart Power Strip (4 Outlet + 4 USB)
• Smart Life or Tuya app (iOS/Android)
• 2.4GHz Wi-Fi network
• Smart Life or Tuya account

Step-by-Step Setup

1. Plug in the power strip: Connect to a wall outlet. LED indicators will illuminate
2. Enter pairing mode: Press and hold any outlet button for 5 seconds until LED blinks rapidly
3. Open Smart Life app: Tap "+" → "Add Device" → "Electrical" → "Power Strip (Wi-Fi)"
4. Confirm LED status: Ensure the LED is blinking rapidly (EZ mode)
5. Enter Wi-Fi credentials: Select your 2.4GHz network and enter password
6. Wait for connection: The app will configure the device (30-60 seconds)
7. Name outlets: Give each of the 4 outlets a custom name
8. Enable voice control: Link to Alexa or Google Assistant in app settings

Key Features

• 4 smart outlets: Individual control for each AC outlet
• 4 USB ports: Group-controlled USB charging ports
• Tuya ecosystem: Works with thousands of Tuya-compatible devices
• Scheduling: Set timers and schedules per outlet
• Voice control: Works with Alexa and Google Assistant
• Scenes: Create automation scenes with other smart devices

Troubleshooting

• LED blinks slowly: You're in AP mode. Hold button again for rapid blink (EZ mode)
• Can't find 2.4GHz network: Disable 5GHz temporarily or check if band-steering is enabled
• Setup times out: Try AP mode - manually connect to "SmartLife-XXXX" network
• USB won't toggle: Not all models support USB control. Check if USB appears in app
• Factory reset: Hold any button for 10+ seconds until all LEDs flash