How to Set Up Your HEYVALUE Smart Power Strip Surge Protector

What You'll Need

• HEYVALUE Smart Power Strip Surge Protector
• Smart Life app (iOS/Android)
• 2.4GHz Wi-Fi network
• Smart Life account

Step-by-Step Setup

1. Check surge protection: Plug in and verify the protection indicator LED is lit
2. Initiate pairing: Press and hold any outlet button for 5 seconds until LED blinks rapidly
3. Open Smart Life app: Tap "+" → "Add Device"
4. Select device type: Choose "Electrical" → "Power Strip"
5. Connect to device: The app will find and connect to the strip automatically
6. Enter Wi-Fi password: Provide your 2.4GHz network credentials
7. Complete setup: Name the device and individual outlets
8. Link voice assistants: Connect to Alexa or Google in settings

Key Features

• Surge protection: Protects connected devices from power spikes
• Protection indicator: LED shows surge protection is active
• Multiple outlets: Individual control per outlet
• USB ports: Convenient charging options
• Voice control: Alexa and Google Assistant compatible
• Scheduling: Set automatic on/off schedules

Troubleshooting

• Protection LED off: Surge protection exhausted after a surge. Replace the strip
• Can't enter pairing mode: Unplug, wait 30 seconds, plug back in, then hold button
• Setup keeps timing out: Switch to AP mode by holding button until LED blinks slowly
• Outlets unresponsive: Check if master power switch is on
• Factory reset: Press and hold any button for 15 seconds