How to Set Up Your IKEA TRETAKT Smart Plug

Beginner 15-30 minutes

What You'll Need

  • IKEA TRETAKT Smart Plug
  • Available wall outlet
  • IKEA DIRIGERA Hub or Matter-compatible controller
  • Smartphone with IKEA Home Smart app or Matter app

Step-by-Step Setup

  1. Plug in TRETAKT: Insert the smart plug into a wall outlet. The LED indicator will illuminate.
  2. Enter pairing mode: Press and hold the button on the plug for 5 seconds until the LED blinks.
  3. For DIRIGERA setup: Open IKEA Home Smart app, go to hub settings, tap "Add device," and follow prompts.
  4. For Matter setup: Open your Matter controller (Apple Home, Google Home). Tap "+" and scan the Matter QR code on the plug.
  5. Wait for pairing: The plug will connect to your network.
  6. Name the plug: Give it a descriptive name based on what it controls.
  7. Assign room: Place in the appropriate room.
  8. Test operation: Toggle via app and physical button to verify.
  9. Set up schedules: Configure timers and automations as desired.

Key Features

  • Zigbee connectivity (with DIRIGERA)
  • Matter-compatible
  • Physical on/off button
  • LED status indicator
  • Scheduling and timers
  • Works with IKEA Home Smart app
  • Cross-platform via Matter
  • Affordable smart plug

Troubleshooting

  • LED not blinking: Unplug and replug. Hold button for 5+ seconds. Ensure outlet has power.
  • Won't pair with DIRIGERA: Ensure hub is online. Move plug closer to hub during pairing. Try factory reset.
  • Matter pairing fails: Ensure you have a Thread border router or the plug supports Wi-Fi. Scan code carefully.
  • Physical button not working: May indicate hardware issue. Try factory reset. Contact IKEA if problem persists.
  • Plug showing offline: Check hub connection. Power cycle the plug. Remove and re-add to the system.