How to Set Up Your Jinvoo Smart Wi-Fi Power Strip

What You'll Need

• Jinvoo Smart Wi-Fi Power Strip
• Jinvoo Home app or Smart Life app (iOS/Android)
• 2.4GHz Wi-Fi network
• Account for chosen app

Step-by-Step Setup

1. Plug in the power strip: Connect to a wall outlet. LED should start blinking
2. Enter pairing mode: If LED isn't blinking rapidly, hold button for 5 seconds
3. Open Jinvoo Home or Smart Life: Tap "+" to add device
4. Select Power Strip: Find "Power Strip" in the Electrical category
5. Confirm LED status: Verify rapid blinking (EZ mode)
6. Enter Wi-Fi info: Provide your 2.4GHz network name and password
7. Wait for connection: Allow 30-60 seconds for setup to complete
8. Name your device: Give outlets descriptive names

Key Features

• Individual outlet control: Each outlet can be managed separately
• USB charging: Built-in USB ports for device charging
• Tuya compatible: Works with Tuya ecosystem
• Scheduling: Create daily or weekly schedules
• Voice assistants: Works with Alexa and Google Home
• Timer functions: Countdown timers for auto-off

Troubleshooting

• Slow blink vs fast blink: Fast = EZ mode (use this). Slow = AP mode (manual connection)
• Setup fails: Turn off mobile data. Ensure phone and strip are near router
• Device goes offline: May indicate weak Wi-Fi. Check signal at strip location
• Works with Smart Life: Jinvoo uses Tuya platform - Smart Life app often works better
• Reset: Hold power button 10+ seconds until LED changes pattern