How to Set Up Your Legrand Radiant Z-Wave Outlet

What You'll Need

• Legrand Radiant Z-Wave Outlet
• Z-Wave smart home hub
• Neutral wire at outlet box
• Screwdriver and voltage tester

Step-by-Step Setup

1. Turn off power at the circuit breaker
2. Verify power is off
3. Connect wiring:
   • Hot wire to brass terminal
   • Neutral wire to silver terminal
   • Ground wire to green terminal
4. Mount outlet in box with Radiant wall plate
5. Restore power
6. Add to Z-Wave hub:
   • Put hub in inclusion mode
   • Press the outlet button
   • LED flashes during pairing
   • Confirm pairing in hub interface

Key Features

• Z-Wave Plus certified
• Z-Wave signal repeater
• Radiant screwless wall plate compatible
• Split outlet (one smart, one always-on)
• LED status indicator
• UL listed

Troubleshooting

• Pairing fails: Exclude from network first, then try including
• Not responding: Check Z-Wave network status and mesh health
• Factory reset: Hold button 10+ seconds until LED flashes rapidly
• LED behavior: Can be configured through Z-Wave parameters