How to Set Up Your Meross Smart Surge Protector Power Strip

What You'll Need

• Meross Smart Surge Protector Power Strip MSS426F
• Meross app (iOS/Android)
• 2.4GHz Wi-Fi network
• Meross account

Step-by-Step Setup

1. Inspect the device: Verify the surge protection indicator light is intact
2. Connect to power: Plug in the surge protector. The protection LED should illuminate, and the power LED will flash
3. Open Meross app: Tap "+" and select "Power Strip" or "Surge Protector"
4. Put device in pairing mode: If not already flashing, hold power button for 5 seconds
5. Connect to device network: Follow prompts to join the Meross setup network
6. Enter Wi-Fi credentials: Input your 2.4GHz network password
7. Wait for connection: The strip will connect and LED will turn solid
8. Configure outlets: Name outlets and set up any automations

Key Features

• Enhanced surge protection: 1800J surge rating with ground protection
• Protection indicator: LED shows surge protection status
• Individual outlet control: 6 independently controllable AC outlets
• USB ports: 3 USB-A ports with smart control
• ETL certified: Meets safety standards for surge protection
• Multi-platform support: Works with HomeKit, Alexa, Google Assistant

Troubleshooting

• Protection LED off: The surge protection has been used up. Replace the strip for continued protection
• Tripped circuit: The strip has overcurrent protection. Unplug high-draw devices and reset
• Pairing issues: Ensure router isn't blocking IoT devices. Try guest network if available
• HomeKit slow to respond: Enable "Thread" if you have a HomePod mini (this model supports Thread)
• Full reset: Hold power button 10+ seconds, release when all indicators flash