How to Set Up Your Meross Smart Wi-Fi Power Strip (6 Outlet)

What You'll Need

• Meross Smart Wi-Fi Power Strip (6 Outlet) MSS425F
• Meross app (iOS/Android)
• 2.4GHz Wi-Fi network
• Meross account

Step-by-Step Setup

1. Position the power strip: Place the MSS425F where you need it. It includes 6 AC outlets and 3 USB ports
2. Power on: Plug into a wall outlet. The LED on the power button will flash quickly
3. Open the Meross app: Tap "+" in the top right corner and select "Power Strip"
4. Select your model: Choose "MSS425F" or "6 AC + 3 USB" from the list
5. Enter pairing mode: If not flashing, press and hold the power button for 5 seconds
6. Connect to device: The app will guide you to connect to "Meross_SW_XXXX" network
7. Configure Wi-Fi: Enter your home network password and wait for connection
8. Name outlets: Tap each outlet icon to give it a custom name

Key Features

• Individual outlet control: All 6 outlets can be controlled separately
• Smart USB ports: 3 USB ports can be toggled on/off as a group
• HomeKit support: Works natively with Apple HomeKit (scan code on device)
• Scheduling: Create unique schedules for each outlet
• Voice control: Works with Siri, Alexa, and Google Assistant
• Surge protection: 1200J surge protection rating

Troubleshooting

• HomeKit pairing fails: Reset the device and try scanning the HomeKit code again. Ensure you're on 2.4GHz
• LED flashing but won't pair: Bring your phone closer to the strip during initial setup
• Outlets show offline in HomeKit: Remove from HomeKit and Meross app, then re-pair starting with HomeKit
• USB ports won't turn off: USB group control must be enabled in Meross app settings
• Factory reset: Hold power button for 10 seconds until all LEDs flash