How to Set Up Your Treatlife Smart Power Strip (4 Outlet)

What You'll Need

• Treatlife Smart Power Strip (4 Outlet)
• Treatlife app or Smart Life app (iOS/Android)
• 2.4GHz Wi-Fi network
• Treatlife or Smart Life account

Step-by-Step Setup

1. Unbox and connect: Plug the power strip into a wall outlet
2. Enter pairing mode: Press and hold any outlet button for about 5 seconds until the LED starts blinking rapidly
3. Open the Treatlife app: Tap the "+" icon to add a new device
4. Select device type: Navigate to "Electrical" → "Power Strip"
5. Verify pairing mode: Confirm the LED is blinking rapidly (EZ mode)
6. Connect to Wi-Fi: Enter your 2.4GHz network password
7. Wait for setup: Allow 30-60 seconds for connection
8. Customize device: Name the strip and individual outlets

Key Features

• 4 controllable outlets: Independent on/off and scheduling per outlet
• USB charging ports: Typically 4 USB-A ports (always-on or group controlled)
• Physical buttons: Manual control for each outlet
• Voice control: Compatible with Amazon Alexa and Google Home
• Schedules and timers: Set recurring schedules or countdown timers
• Smart scenes: Trigger multiple outlets with one command

Troubleshooting

• Setup fails repeatedly: Switch to AP mode by pressing the button until LED blinks slowly, then manually connect to the device's hotspot
• Outlets respond slowly: Check Wi-Fi signal strength at the strip's location
• Can't control via Alexa: Unlink and relink the Treatlife skill, then discover devices again
• One outlet unresponsive: Try the physical button. If it doesn't work, may be hardware issue
• Full factory reset: Hold any outlet button for 10+ seconds until all LEDs flash