How to Set Up Your Treatlife Smart Surge Protector Strip

What You'll Need

• Treatlife Smart Surge Protector Strip
• Treatlife app or Smart Life app (iOS/Android)
• 2.4GHz Wi-Fi network
• Treatlife or Smart Life account

Step-by-Step Setup

1. Check surge protection: Before setup, verify the surge protection indicator LED is on
2. Plug in the strip: Connect to a grounded wall outlet for full surge protection
3. Activate pairing: Hold the main power button for 5 seconds until LED flashes rapidly
4. Open Treatlife app: Tap "+" and select "Power Strip" from the Electrical category
5. Choose network: Select your 2.4GHz network and enter password
6. Wait for connection: The strip will connect and LED will become solid
7. Configure outlets: Name each outlet based on connected devices
8. Set up automations: Create schedules or link to voice assistants

Key Features

• Surge protection: Protects connected devices from power spikes
• Protection indicator: LED shows when surge protection is active
• Individual outlet control: Manage each outlet independently
• USB ports: Convenient charging with smart control
• Away mode: Random on/off patterns for security
• Energy monitoring: Track power consumption on supported models

Troubleshooting

• Surge LED is off: Protection may be depleted after a surge event. Replace the strip
• Strip won't power on: Check if circuit breaker tripped. May have overcurrent protection that needs reset
• Devices aren't protected: Ensure the strip is plugged into a properly grounded outlet
• Pairing mode won't activate: Unplug for 60 seconds, plug back in, then try holding button again
• Hard reset: Hold main power button for 15 seconds, or press reset button if present