Fibaro Z-Wave Sensor Not Pairing or Reporting

Fibaro Z-Wave sensors offer premium build quality and features. This guide covers pairing and reporting issues.

Sensor Not Pairing

1. Put Z-Wave hub in inclusion mode first
2. Triple-click B-button on Fibaro device
3. LED sequence indicates pairing status
4. Keep device within 3 feet of hub
5. Exclude first if previously paired

Exclusion Process

1. Put hub in exclusion mode
2. Triple-click B-button on device
3. Wait for exclusion confirmation
4. Then attempt fresh inclusion
5. Necessary for re-pairing to different hub

Motion Sensor (FGMS-001)

1. Multi-sensor: Motion, temp, light, tamper
2. Adjust sensitivity via parameters
3. LED color indicates sensor triggers
4. Blind time prevents rapid retriggering
5. Battery life depends on activity level

Flood Sensor (FGFS-101)

1. Gold probes detect water contact
2. Also includes temperature sensor
3. Tamper alarm if moved
4. Tilt sensor available on some versions
5. Place probes on floor surface

KeyFob and Button

1. Configure button actions via hub
2. Single, double, triple, hold actions
3. Scene activation via central scene
4. Home Assistant uses device triggers
5. Sequence of button actions supported

Home Assistant Z-Wave JS

1. All Fibaro devices work with Z-Wave JS
2. Parameters configurable in Z-Wave JS UI
3. May need interview after inclusion
4. Check device page for available entities
5. Some parameters need manual configuration