How to Set Up the Broadlink Matter SuperBridge

Mid-Range 20-30 minutes

What You'll Need

  • Broadlink Matter SuperBridge
  • Existing IR/RF controlled devices
  • Broadlink app
  • Matter-compatible controller
  • 2.4GHz WiFi network

Step-by-Step Setup

  1. Position the SuperBridge: Place with line of sight to devices you want to control.
  2. Connect power: Plug in using the included USB-C cable and adapter.
  3. Download Broadlink app: Install on your smartphone.
  4. Create account: Sign up for Broadlink.
  5. Add device: Tap "+" and select SuperBridge. Follow pairing instructions.
  6. Connect to WiFi: Enter your 2.4GHz network credentials.
  7. Learn IR/RF codes: Add your existing devices by pointing remotes at the SuperBridge.
  8. Test controls: Verify each learned command works correctly.
  9. Add to Matter: In the app, generate a Matter pairing code.
  10. Open your Matter controller: Apple Home, Google Home, etc.
  11. Add accessory: Scan the Matter QR code to add the bridge.
  12. Devices appear in Matter: Your legacy devices now show up in your smart home platform.

Key Features

  • Bridges legacy IR/RF devices to Matter
  • Supports thousands of device brands
  • IR blaster + RF transmitter (433MHz)
  • Built-in device database
  • Learn any remote control
  • Creates virtual devices for Matter
  • Local control (no cloud required for Matter)

Troubleshooting

  • IR commands not working: Reposition SuperBridge for better line of sight.
  • RF range issues: RF has limited range. Move bridge closer to RF devices.
  • Matter devices not appearing: Ensure bridge firmware is updated. Re-pair if needed.
  • Learned codes unreliable: Re-learn codes slowly, holding remote steady during learning.

Was this guide helpful?