What You'll Need
- Defend 360 Cellular Camera
- Defend app
- Cellular data plan (included trial)
- Mounting hardware (included)
Step-by-Step Setup
- Unbox the camera: Remove camera and solar panel (if included).
- Charge the battery: Fully charge before deployment for best performance.
- Download Defend app: Install on your smartphone.
- Create account: Sign up and activate your cellular plan.
- Power on camera: Press and hold the power button until LED blinks.
- Add device: In the app, tap "+" and scan the QR code on the camera.
- Wait for cellular connection: Camera connects via LTE—no WiFi needed.
- Choose mounting location: Select a spot with good cellular signal and solar exposure (if using solar).
- Mount the camera: Use included bracket and screws for permanent mount.
- Connect solar panel (if equipped): Attach for continuous charging.
- Configure PTZ: Test the 360° pan and tilt functionality from the app.
- Set up alerts: Configure motion detection and notification preferences.
Key Features
- No WiFi required—cellular connection
- No power outlet needed—battery + solar
- 360° PTZ (pan-tilt-zoom)
- 1080p HD video
- Two-way audio
- Night vision
- Weatherproof (IP66)
- Truly wireless installation
Troubleshooting
- No cellular signal: Relocate to area with better LTE coverage. Check SIM is activated.
- Battery draining fast: Reduce motion sensitivity. Ensure solar panel gets sunlight.
- Video quality poor: Weak signal affects quality. Move camera for better reception.
- PTZ not responding: Check battery level. Motor requires adequate power.
Was this guide helpful?