What You'll Need
- Govee Permanent Outdoor Lights Pro kit
- Ladder
- Measuring tape
- Drill with bits (if using clips)
- Govee Home app
- 2.4GHz WiFi network
Step-by-Step Setup
- Measure your roofline: Calculate the total length needed. Order appropriate kit size.
- Plan the installation: Mark where controller will go (needs outdoor outlet nearby).
- Install mounting clips: Attach clips along roofline, eaves, or fascia at recommended intervals.
- Connect light segments: Link the LED segments together following arrow directions.
- Mount the lights: Snap light strand into mounted clips.
- Connect to controller: Plug the light strand into the control box.
- Connect power: Plug controller into outdoor outlet.
- Download Govee Home app: Install on your smartphone.
- Create account: Sign up for Govee.
- Add device: Tap "+" and select "Permanent Outdoor Lights."
- Connect to WiFi: Enter your 2.4GHz network credentials.
- Map your lights: Use the app to configure light segments to match your installation.
- Choose effects: Select from holiday themes, solid colors, or create custom patterns.
Key Features
- RGBIC (individually addressable LEDs)
- Weatherproof (IP67)
- Year-round use (holidays, parties, everyday)
- Music sync capability
- Schedules and timers
- Works with Alexa and Google Home
- 100+ pre-made light effects
Troubleshooting
- Some LEDs not lighting: Check connections between segments. Ensure arrows align.
- WiFi not connecting: Controller only supports 2.4GHz.
- Effects not displaying correctly: Remap light segments in the app to match physical layout.
- Lights flickering: Check power supply and connections. May need additional power injection for long runs.
Was this guide helpful?