How to Set Up Your Abode Smart Security Kit

Intermediate 10-20 minutes

What You'll Need

  • Abode Gateway (hub)
  • Abode Key Fob or Keypad
  • Door/window sensors
  • Motion sensor
  • Smartphone with Abode app
  • Ethernet cable or Wi-Fi network
  • Abode account

Step-by-Step Setup

  1. Connect the Gateway: Plug Ethernet into your router (recommended) or prepare for Wi-Fi setup. Connect power.
  2. Wait for boot: The gateway takes 2-3 minutes to initialize. LED will stabilize when ready.
  3. Download Abode app: Install and create your account.
  4. Add Gateway: Tap "+" and scan the QR code on the bottom of the gateway, or enter the MAC address manually.
  5. Wi-Fi setup (if not using Ethernet): Follow app prompts to connect to your network.
  6. Add Key Fob or Keypad: In the app, tap "+" → select your device → follow pairing instructions. Set your PIN for the Keypad.
  7. Add Door/Window Sensors: Put gateway in pairing mode, then pull the battery tab on each sensor. Install using included adhesive.
  8. Add Motion Sensor: Pair through the app. Mount in corner, 6-7 feet high, facing the room.
  9. Configure modes: Set up Home, Away, and Standby modes with appropriate sensors for each.
  10. Set up automations: Create CUE automations for lights, locks, and other connected devices.

Key Features

  • HomeKit, Alexa, Google Assistant compatible
  • Z-Wave and Zigbee device support
  • No contract professional monitoring
  • Cellular and battery backup
  • IFTTT integration
  • CUE automation engine
  • Geofencing for automatic arming
  • Works with 1000+ devices

Troubleshooting

  • Gateway not connecting: Verify Ethernet connection or Wi-Fi credentials. Check router settings for any device blocking. Power cycle the gateway.
  • Sensors not pairing: Ensure gateway is in pairing mode. Move sensor within 10 feet during pairing. Check battery is installed correctly.
  • HomeKit not showing: Ensure HomeKit is enabled in gateway settings. Re-scan the HomeKit code. Check that you're on the same network.
  • Cellular backup not working: Requires Abode Pro monitoring plan. Check cellular signal strength in app. Contact Abode support if signal is good but backup fails.
  • Automation not triggering: Check device status—ensure all devices in the automation are online. Review CUE automation conditions. Test individual devices.