How to Set Up Your Aeotec Siren 6 Z-Wave Smart Siren

What You'll Need

• Aeotec Siren 6
• Z-Wave compatible hub (SmartThings, Home Assistant, Hubitat, etc.)
• Power adapter (included)
• Smartphone with hub's app
• DSK code (printed on device for S2 security)

Step-by-Step Setup

1. Power On Siren: Connect the Siren 6 to power using the included adapter. The LED will turn on.
2. Put Hub in Pairing Mode: Open your Z-Wave hub's app and enable device inclusion/pairing mode.
3. Add Siren to Network: Tap the Action Button on the Siren 6 once (quick tap).
4. Enter DSK (for S2 Security): If prompted, enter the first 5 digits of the DSK printed on the device.
5. Wait for Pairing: The LED will emit a solid color for 30 seconds when paired successfully.
6. If Pairing Failed: LED continues to blink slowly. Try again or move closer to the hub.
7. Configure Sounds: Use your hub's app to select from available siren sounds and volume levels.
8. Test the Siren: Trigger a test from your hub to verify the siren works properly.

Key Features

• 8 customizable sound profiles (siren, doorbell, chimes)
• Adjustable volume levels
• Z-Wave Plus with S2 security
• 4-hour backup battery during power outage
• Can be used as doorbell with Aeotec Button
• LED light indicator with multiple colors

Troubleshooting

• LED keeps blinking: Pairing failed. Ensure hub is in pairing mode and try again within 30 feet.
• Remove from network: Press Action Button 6 times in 2 seconds while hub is in exclusion mode.
• Home Assistant setup: Press "c" for integrations, add Z-Wave device, press inclusion button on Siren 6.
• SmartThings custom sounds: Install the custom device handler by krlaframboise for full functionality.
• Volume too loud/quiet: Adjust via hub settings. Siren 6 supports multiple volume levels per sound profile.