What You'll Need

Cree Connected LED A19 bulb
Zigbee-compatible hub (SmartThings, Philips Hue, etc.)
Lamp or fixture with E26 socket
Smartphone with your hub's app

Step 1: Install the Bulb

Screw the Cree Connected bulb into a standard E26 socket. Ensure the power switch is in the ON position.

Step 2: Put Hub in Pairing Mode

Open your Zigbee hub's app and start the device pairing/discovery process.

Step 3: Power Cycle to Pair

If the bulb is new and hasn't been paired before, it should automatically enter pairing mode when powered on. If it doesn't appear, try turning the bulb off and on again.

Step 4: Confirm in App

Your hub should discover the bulb within 60 seconds. Confirm the addition in your app and give the bulb a name.

Step 5: Test Control

Use the app to turn the bulb on/off and adjust brightness. The bulb should respond within seconds.

Reset to Factory (If Needed)

To reset: Turn the bulb on for 1 second, off for 1 second. Repeat this on/off cycle 5 times. On the 5th "on," the bulb will blink to confirm reset and enter pairing mode.

Features

Zigbee Protocol: Reliable mesh networking
Dimmable: 0-100% brightness control
Energy Efficient: LED technology saves energy
Warm White: Comfortable 2700K color temperature
Long Life: 25,000+ hour rated life

Troubleshooting

Won't pair: Reset bulb; move closer to hub; check hub compatibility
Intermittent connection: Zigbee devices create mesh - add more devices to strengthen
Flickering: Ensure dimmer switch is compatible (or use non-dimmer switch)