What You'll Need
- Hanwha Wisenet QNO-8080R camera
- PoE switch or injector
- Ethernet cable
- NVR or VMS software
- Computer for configuration
Step 1: Plan Installation
Choose mounting location with clear view. This is a professional-grade bullet camera suited for outdoor installation.
Step 2: Mount the Camera
Install the mounting bracket and attach the camera body securely.
Step 3: Connect PoE
Run Ethernet cable from your PoE switch to the camera. The camera powers on via PoE.
Step 4: Find Camera IP
Use Wisenet Device Manager software to discover the camera on your network.
Step 5: Configure Settings
Access the web interface to configure video settings, motion detection, and network parameters.
Step 6: Add to NVR/VMS
Add the camera to your recording system using ONVIF or direct integration.
Features
- 5MP Resolution: High-detail imaging
- IR Night Vision: Up to 30m range
- WDR: Wide dynamic range for challenging lighting
- ONVIF: Open platform compatibility
- IP66 Rated: Weatherproof construction
Troubleshooting
- Not powering on: Verify PoE switch output; check cable
- Can't find camera: Ensure same network segment; check firewall
- IR not activating: Check IR settings in menu