How to Set Up Your Innr Smart Bulb White A19 Zigbee

What You'll Need

• Innr Smart Bulb White A19
• Compatible Zigbee hub (Philips Hue, SmartThings, Amazon Echo, etc.)
• E26/E27 light socket
• Smartphone with hub's app

Step-by-Step Setup

1. Install Bulb: Screw the Innr bulb into a standard E26 socket.
2. Turn On Power: Switch on the light. The bulb will illuminate and enter pairing mode.
3. Open Hub App: Launch your Zigbee hub's app (Hue, SmartThings, Alexa, etc.).
4. Start Search: Navigate to add new device/light and begin searching.
5. Power Cycle: If using Hue, turn the bulb off and on during the search.
6. Confirm Addition: The bulb should appear in your app within 30 seconds.
7. Assign to Room: Name the bulb and assign it to an appropriate room.

Key Features

• Tunable white (2700K warm to 6500K daylight)
• Zigbee 3.0 compatible
• Works with Philips Hue Bridge and other Zigbee hubs
• Dimmable from 1-100%
• 806 lumens (60W equivalent)
• Long life: 25,000 hours
• Voice control through Alexa and Google Assistant

Troubleshooting

• Not found during search: Reset the bulb by toggling power 6 times rapidly.
• Bulb unresponsive after pairing: Check hub connection. Try removing and re-adding the bulb.
• Dimming not smooth: Update bulb firmware if available through your hub.
• Factory reset: Turn off and on 6 times. Bulb will flash to confirm reset.
• Range issues: Add more Zigbee devices to create a stronger mesh network.