Skip to main content
What You'll Need
- Leviton Decora Smart Switch (Matter version, model D2MR1)
- Neutral wire at switch location (required)
- Matter-compatible smart home controller (Apple Home, Google Home, SmartThings, Amazon Alexa)
- Screwdriver and voltage tester
- 2.4GHz WiFi network
Step-by-Step Setup
- Turn off power: Switch off the circuit breaker controlling the switch. Verify power is off with a voltage tester.
- Remove old switch: Unscrew the faceplate and switch. Take a photo of existing wiring for reference.
- Identify wires: Locate hot (black), neutral (white bundle), load (to light), and ground (green/bare) wires.
- Connect wires: Connect ground to green screw, neutral to white lead, hot to brass screw marked "Line," and load to brass screw marked "Load."
- Mount switch: Carefully push wires into box and secure switch with mounting screws. Attach faceplate.
- Restore power: Turn on the circuit breaker. The switch LED should illuminate.
- Pair with Matter: Open your smart home app and scan the Matter QR code on the switch or its documentation.
- Complete setup: Name the switch and assign it to a room. Test on/off control from the app and physically.
Key Features
- Matter certified: Works with all Matter-compatible platforms without separate apps
- LED indicator: Customizable locator light shows switch status in the dark
- Decora style: Modern rocker design matches existing Decora switches and plates
- Local control: Works even if WiFi is down; Matter ensures fast response
- Multi-admin: Control from multiple platforms simultaneously
- OTA updates: Receives firmware updates through your Matter controller
Troubleshooting
- Switch doesn't power on: Verify circuit breaker is on. Check all wire connections are secure.
- Light flickers: Ensure load doesn't exceed switch rating (1800W incandescent, 600W LED/CFL).
- Won't pair with Matter: Factory reset by pressing the switch rapidly 7 times. Ensure phone is on 2.4GHz WiFi.
- Offline in app: Check WiFi signal strength at switch location. May need WiFi extender if weak.
- LED indicator won't turn off: Adjust LED settings in your Matter controller app.