How to Set Up Your Nanoleaf Shapes Triangles (9-Pack)

What's in the Box

Your Nanoleaf Shapes Triangles (9-Pack) package includes nine triangular light panels, a controller panel, nine mounting connectors (linkers), a power supply with cable, adhesive mounting tape strips, and a quick start guide. Each triangle panel measures approximately 9 inches on each side and features full-face RGBWW LED illumination. The triangular shape offers more angular, geometric layout possibilities compared to hexagons, allowing you to create sharp patterns, arrows, abstract art, and other distinctive designs on your wall.

Prerequisites

Before installation, make sure you have:

• A flat, smooth wall surface with enough space for your layout (approximately 3-4 square feet for a 9-panel arrangement)
• A power outlet within cable reach of the controller's location in your layout
• The Nanoleaf app installed on your smartphone
• A 2.4GHz Wi-Fi network for the controller to connect to
• A clean wall surface free of dust, oil, or loose paint for the mounting adhesive

Nanoleaf Shapes Triangles connect to your network via 2.4GHz Wi-Fi through the controller panel. A single power supply supports up to 22 triangles. If you plan to expand beyond the starter kit, you may need an additional power supply for larger layouts.

Step-by-Step Setup

1. Plan your layout by arranging the triangles on a flat surface or using the Nanoleaf app's layout tool. Triangles can be oriented with a point up or down and connected on any of their three edges, providing extensive design flexibility.
2. Snap the linker connectors into the edge ports of adjacent panels. Each triangle has three connection points. Ensure the controller panel is part of the connected layout.
3. Apply adhesive mounting tape strips to the back of each panel. Press the tape firmly onto the panel surface.
4. Mount the controller panel first, pressing it firmly against the wall for 30 seconds. Position it where the power cable can reach the nearest outlet discreetly.
5. Continue mounting each triangle in your planned sequence, pressing firmly for 30 seconds per panel. Align each panel carefully with its neighbors using the linker connectors as guides for proper spacing.
6. Connect the power supply to the controller panel and plug it into the outlet. The triangles should light up immediately.
7. Open the Nanoleaf app, select "Add Device," choose "Shapes," and follow the Wi-Fi setup instructions. Enter your 2.4GHz network password when prompted.

App Pairing and Customization

The Nanoleaf app maps your physical triangle layout and lets you customize each panel's color individually or apply dynamic scenes that flow across the entire display. The Shapes Triangles support touch interaction, so you can tap panels to cycle through colors or trigger scene changes. Explore the Nanoleaf Scene Store for community-created lighting designs, or create your own using the palette editor. The rhythm music sync mode uses the controller's microphone to create reactive light shows that pulse with audio in the room.

Smart Home Integration Tips

The Shapes Triangles integrate with Apple HomeKit, Google Home, Amazon Alexa, Samsung SmartThings, and IFTTT. Add them to your preferred platform for voice control such as "Hey Google, set the triangles to blue" or "Alexa, turn off the game room panels." Use automations to activate energizing scenes in the morning and switch to calming warm tones at night. The triangles also support Nanoleaf's Screen Mirror desktop feature for gaming and entertainment immersion. Shapes panels from different kits (triangles, mini triangles, hexagons) can be mixed and connected together in a single layout for creative hybrid designs.

Quick Troubleshooting

If a panel does not light up, remove and reseat the linker connector between it and its neighbors. A loose connection is the most common cause of individual panel failures. If none of the panels illuminate, check the power supply connection to the controller. If the system does not connect to Wi-Fi, verify that your router broadcasts a 2.4GHz network and that you are entering the correct password. If panels fall off the wall within the first few hours, the adhesive may not have bonded properly. Remove the panels, clean the wall with isopropyl alcohol, apply new mounting tape, and press firmly for 60 seconds per panel. Avoid mounting on textured surfaces like stucco or brick without using the screw mount option.