How to Set Up Your Qingping Air Monitor 2

10-15 minutes

What You'll Need

  • Qingping Air Monitor 2
  • iPhone or iPad with Apple Home app
  • 2.4GHz Wi-Fi network
  • USB-C power cable and adapter
  • HomeKit code (on device or packaging)

Step-by-Step Setup

  1. Power On Device: Connect the Qingping Air Monitor to power using the USB-C cable.
  2. Option 1 - HomeKit Direct: Open the Apple Home app, tap (+), select "Add Accessory," and scan the HomeKit code on the bottom of the device.
  3. Option 2 - Qingping+ App: Download the Qingping+ app for additional settings like temperature units and firmware updates.
  4. Assign to Room: Choose which room the monitor will be placed in and give it a name.
  5. Set Preferences: If using the Qingping+ app, adjust temperature units (Celsius/Fahrenheit) and other settings.
  6. Ensure Home Hub: For remote access, verify you have a HomePod or Apple TV set up as a home hub.
  7. Allow Calibration: The device will automatically adjust to your environment over the first 24 hours.

Key Features

  • Monitors CO2, PM2.5, PM10, temperature, and humidity
  • Clear Retina display with touch controls
  • Native HomeKit support with no bridge required
  • Create automations based on air quality levels
  • Siri voice control for checking readings
  • Historical data viewable in the Qingping+ app

Troubleshooting

  • HomeKit pairing fails: Reset network settings by holding the touch bar for 8 seconds, then try again.
  • Temperature in wrong units: Use the Qingping+ app to change between Celsius and Fahrenheit.
  • Remote access not working: Ensure a HomePod or Apple TV is set up as your home hub.
  • Readings seem irregular: Allow 24 hours for the device to calibrate to your environment.
  • Can't update firmware: You must pair with the Qingping+ app first to access firmware updates.