What You'll Need

Step-by-Step Setup

Plan camera placement: The Duo 2's dual-lens design provides ultra-wide 180° coverage. Position to maximize this panoramic view.
Connect via PoE (recommended): Run an Ethernet cable from a PoE switch or injector to the camera. This provides both power and network connectivity.
Alternative DC power: Connect the 12V DC adapter and a separate Ethernet cable for network.
Wait for initialization: The camera takes about 30-60 seconds to boot. IR LEDs will briefly illuminate during startup.
Download Reolink app: Install and sign in to your account.
Add the camera: Tap "+" and scan the QR code or add manually with the UID.
Set password: Create a secure password for the device.
Mount the camera: Secure the mounting bracket, then attach the camera. The unique horizontal design should be mounted level for best panoramic results.
Configure the stitched view: The app automatically combines both lenses into a seamless panoramic image. Adjust display settings as preferred.

Image stitching visible: Some blending artifacts are normal where the two lenses meet. Adjust camera angle slightly if stitching line is distracting.
One lens darker than other: Clean both lens covers. If one lens is facing a bright light source, adjust camera position. Check settings for both lenses.
PoE not providing power: Duo 2 requires 802.3af PoE (15.4W). Some older switches may not provide sufficient power. Try a PoE injector rated for 15W+.
High bandwidth usage: Dual 4K streams use significant bandwidth. Reduce bitrate in settings. Use sub-stream for remote viewing.
Spotlight not activating: Enable spotlight in camera settings. Check motion detection is enabled. Verify trigger conditions (motion, schedule, etc.).