How to Set Up Your Sengled A19 Smart Bulb (Matter)

What You'll Need

• Sengled A19 Smart Bulb (Matter version)
• Standard E26 light socket
• Matter-compatible controller
• Smartphone with controller app
• 2.4GHz Wi-Fi network

Step-by-Step Setup

1. Turn off fixture: Ensure light switch is off before installing.
2. Install the bulb: Screw the Sengled A19 into the E26 socket.
3. Turn on power: Switch on the fixture. The bulb will illuminate and enter pairing mode.
4. Reset if needed: Turn off/on 5 times quickly to factory reset.
5. Open Matter controller: Apple Home, Google Home, or compatible app.
6. Add device: Tap "+" to add a new accessory.
7. Scan Matter code: Find the QR code on the bulb packaging and scan it.
8. Complete pairing: Wait for the bulb to connect via Wi-Fi.
9. Assign room: Place the bulb in the appropriate room.
10. Test controls: Adjust brightness and turn on/off via app.

Key Features

• Matter-certified
• Soft white (2700K)
• Dimmable
• A19 form factor
• Wi-Fi connected (no hub)
• Works with Apple Home, Google Home, Alexa
• 800 lumens brightness
• Energy efficient LED

Troubleshooting

• Bulb not pairing: Factory reset (5 on/off cycles). Ensure 2.4GHz Wi-Fi. Move closer to router during setup.
• Code not scanning: Enter numeric code manually. Code is on packaging only.
• Bulb offline: Check Wi-Fi signal at fixture. Power cycle the bulb. Remove and re-add.
• Dimming issues: Don't use physical dimmer switches. Smart bulbs need constant power.
• Brightness inconsistent: Update firmware via Sengled app if available.