How to Set Up Your Sengled Light Strip (Matter)

Beginner 10-15 minutes

What You'll Need

  • Sengled Light Strip (Matter version)
  • Power adapter and controller (included)
  • Matter-compatible controller app
  • Smartphone
  • 2.4GHz Wi-Fi network
  • Clean mounting surface

Step-by-Step Setup

  1. Plan installation: Measure where you'll install. Strip can be cut at marked points.
  2. Clean surface: Wipe down mounting area for proper adhesion.
  3. Connect strip to controller: Plug the light strip into the controller.
  4. Apply the strip: Peel adhesive backing and press firmly onto surface.
  5. Connect power: Plug adapter into controller and outlet.
  6. Enter pairing mode: Controller should be in pairing mode automatically or press button for 5 seconds.
  7. Open Matter controller: Apple Home, Google Home, etc.
  8. Scan Matter code: Find code on controller and scan.
  9. Complete setup: Assign to room.
  10. Explore effects: Try colors, scenes, and dynamic effects.

Key Features

  • Matter-certified
  • RGB + tunable white
  • Cuttable design
  • 3M adhesive backing
  • Music sync (via app)
  • Works with major platforms
  • Wi-Fi connected
  • Scene presets

Troubleshooting

  • Strip not lighting: Check controller connection. Verify power adapter works.
  • Cut section not working: Must cut at marked lines only. Use connectors for cut sections.
  • Adhesive failing: Surface must be clean. Use clips for difficult surfaces.
  • Pairing fails: Reset controller. Ensure 2.4GHz Wi-Fi available.
  • Colors uneven: Voltage drop on long runs. Ensure adequate power supply.