How to Set Up Your Sengled Smart LED Bulb A19 White

What You'll Need

• Sengled Smart LED Bulb A19 White
• Compatible Zigbee hub
• E26 light socket
• Hub's smartphone app

Step-by-Step Setup

1. Prepare Hub: Ensure your Zigbee hub is online and ready.
2. Open App: Launch your hub's app (SmartThings, Alexa, or Sengled Home).
3. Add New Light: Go to add device and select Sengled bulb.
4. Enter Pairing Mode: Start the pairing process in the app.
5. Install Bulb: When prompted, screw in the bulb and turn on power.
6. Wait for Connection: The bulb should pair within 1-2 minutes.
7. Configure: Name the bulb and set up any automations.

Key Features

• Soft white light (2700K)
• 800 lumens (60W equivalent)
• Zigbee connectivity
• Dimmable via app
• Works with SmartThings, Echo Plus, Sengled Hub
• Long 25,000 hour lifespan
• Energy efficient (8.7W)

Troubleshooting

• Not discovered: Reset bulb by turning on/off 10 times rapidly until it flashes.
• Hub too close to router: Keep Zigbee hub at least 3 feet from Wi-Fi router to avoid interference.
• Bulb unresponsive: Check hub connection. Try removing and re-adding bulb.
• Dimming issues: Don't use with physical dimmer switches.
• Pairing timeout: You have 3 minutes after powering on to complete pairing.