How to Set Up Your Sonoff NSPanel Pro

Advanced 10-15 minutes

What You'll Need

  • Sonoff NSPanel Pro
  • eWeLink app (iOS/Android)
  • 2.4GHz Wi-Fi network
  • eWeLink account
  • Power supply (wall mount or stand)

Step-by-Step Setup

  1. Mount or place panel: Wall mount or use included stand
  2. Connect power: Plug in the power adapter
  3. Wait for boot: Android-based system will start
  4. Connect Wi-Fi: Go to Settings → Wi-Fi on the panel
  5. Download eWeLink app: Install on phone
  6. Add device: Scan QR code on NSPanel Pro or add manually
  7. Configure dashboard: Add devices, scenes, widgets
  8. Set up Zigbee devices: Pair Zigbee devices directly to panel

Key Features

  • Built-in Zigbee hub: Control Zigbee devices directly
  • 3.95" touchscreen: Color LCD display
  • Android-based: Install apps like cameras, weather
  • Intercom: Two-way audio with other NSPanel Pro units
  • Scenes and automations: Create on-device automations
  • Thermostat mode: Can control HVAC with external sensor

Troubleshooting

  • Zigbee pairing: Put devices in pairing mode, then add via panel
  • Apps not installing: Check storage space and Wi-Fi connection
  • Slow performance: Clear unused apps and widgets
  • No physical switch: NSPanel Pro is display-only (unlike NSPanel)
  • Factory reset: Settings → System → Factory Reset