Skip to main content
What You'll Need
- SwitchBot K10+ Robot Vacuum
- Auto-empty station (included)
- Smartphone with SwitchBot app
- 2.4GHz Wi-Fi network
- SwitchBot Hub for Matter connectivity (optional)
- Boundary strips (optional)
Step-by-Step Setup
- Position the charging station: Place the auto-empty station against a wall with 1.5ft clearance on each side and 4ft in front.
- Connect power: Plug in the charging station. The indicator will illuminate.
- Prepare the robot: Remove all protective packaging and tape from the K10+.
- Place on charger: Position the robot on the charging station. Ensure contacts align. Let it charge fully before first use.
- Download SwitchBot app: Install and create or sign in to your account.
- Add the robot: Tap "+" → "Robot Vacuum" → "K10+."
- Connect to Wi-Fi: Follow prompts to connect the robot to your 2.4GHz network.
- Run initial mapping: Start a cleaning cycle to let the robot map your home.
- Edit rooms: Once mapping is complete, label rooms and set cleaning preferences.
- Add to Matter (optional): With a SwitchBot Hub, share the vacuum to your Matter controller for basic start/stop commands.
Key Features
- World's smallest auto-empty robot vacuum
- LiDAR navigation
- 2500Pa suction power
- Auto-empty station (4L capacity)
- Quiet operation (48dB)
- Multi-floor mapping
- Room-by-room cleaning
- Works with Alexa, Google, Matter (via Hub)
Troubleshooting
- Robot not charging: Clean charging contacts on both robot and station. Ensure robot is properly aligned on dock.
- Map not accurate: Remove obstacles during mapping. Run multiple mapping cycles. Delete and remap if needed.
- Auto-empty not working: Check dustbin is installed. Ensure station bag isn't full. Clean the suction path.
- Wi-Fi connection lost: Only 2.4GHz supported. Move station closer to router. Reset Wi-Fi in app settings.
- Robot getting stuck: Clear floor obstacles. Use boundary strips for problem areas. Check wheels for tangled debris.