Skip to main content
What You'll Need
- Temtop M10i Air Quality Monitor
- Smartphone with Temtop app
- 2.4GHz Wi-Fi network
- USB charging cable
- Small pin or paperclip for calibration button
Step-by-Step Setup
- Charge Device: If battery is low, charge the M10i before setup.
- Power On: Press and hold the home button for 3 seconds to turn on the device.
- Download Temtop App: Install the Temtop app and register an account.
- Connect Phone to Wi-Fi: Ensure your phone is connected to your preferred Wi-Fi network.
- Add Device in App: Tap the (+) sign in the top right corner. Scan the QR code or enter the 20-digit GUID from the device.
- Enter Wi-Fi Config Mode: Use a pin to press and hold the calibration button on the back for 2 seconds. The wireless icon will flash.
- Enter Wi-Fi Password: The Wi-Fi name should auto-fill. Enter your password and tap Next.
- Confirm Connection: Wait until the screen shows a solid Wi-Fi icon, indicating successful connection.
Key Features
- Monitors PM2.5, AQI, TVOC, and HCHO (formaldehyde)
- Real-time display with color-coded AQI levels
- Built-in rechargeable battery for portable use
- App provides remote monitoring and data logging
- Local weather forecast integration
- Remote power on/off via app
Troubleshooting
- Wi-Fi won't connect: Only 2.4GHz networks are supported. 5GHz networks will not work.
- Phone and device on different networks: Ensure both are on the same Wi-Fi during setup.
- Wi-Fi icon not solid: Connection failed. Reset Wi-Fi settings and try again.
- Can't find calibration button: It's a small hole on the back of the device. Use a pin to press it.
- Reset Wi-Fi: Use the reset button on the back to clear previous network settings.