How to Set Up Your VOCOlinc Smart Power Strip PM2

What You'll Need

• VOCOlinc Smart Power Strip PM2
• VOCOlinc app or Apple Home app (iOS/Android)
• 2.4GHz Wi-Fi network
• For HomeKit: Apple home hub (HomePod, HomePod mini, Apple TV)

Step-by-Step Setup

1. Plug in the PM2: Connect to a wall outlet. Status LED will flash
2. Choose your setup method:
   • HomeKit: Open Apple Home app → "+" → "Add Accessory" → Scan code
   • VOCOlinc app: Open app → "+" → Select PM2
3. For HomeKit: Scan the HomeKit code on the device or packaging
4. For VOCOlinc app: Put strip in pairing mode and follow prompts
5. Connect to Wi-Fi: Enter your network credentials when prompted
6. Assign to room: Choose the room for this device
7. Name outlets: Give each of the 3 outlets a unique name

Key Features

• Native HomeKit: Works directly with Apple Home - no hub needed
• 3 smart outlets: Each outlet independently controllable
• 2 USB ports: Always-on USB charging
• Siri control: "Hey Siri, turn off the TV"
• Energy monitoring: Track power consumption (view in VOCOlinc app)
• Multi-platform: Also works with Alexa and Google Assistant

Troubleshooting

• HomeKit pairing fails: Ensure you're on 2.4GHz. Reset and try again
• "No Response" in Home app: Check if home hub is online. Power cycle the strip
• Can't see energy data: Energy monitoring requires VOCOlinc app, not visible in Apple Home
• Slow response: Check Wi-Fi signal. Consider moving closer to router or access point
• Factory reset: Press and hold button for 10+ seconds until LED flashes rapidly