Installing Your Brilliant Smart Dimmer Switch

What You'll Need

• Brilliant Smart Dimmer Switch
• Phillips head screwdriver
• Wire strippers
• Voltage tester
• Smartphone with Brilliant app
• 2.4GHz WiFi network
• Neutral wire required

Step-by-Step Setup

1. Download Brilliant app: Install and start guided installation.
2. Turn off power: Switch off circuit breaker.
3. Remove existing switch: Unscrew wall plate and disconnect wires.
4. Connect wires: Attach Line, Load, Neutral, and Ground to corresponding terminals.
5. Mount switch: Secure in wall box and attach wall plate.
6. Restore power: Turn breaker on.
7. Set up in app: Follow prompts to connect to WiFi.
8. Configure dimmer: Set bulb type, min/max levels, and fade rates.
9. Link to Brilliant Control: If you have a Brilliant panel, link for unified control.

Key Features

• Slide touch dimming
• WiFi connected - no hub needed
• Works standalone or with Brilliant Control panels
• Motion sensing (optional activation)
• Works with Alexa and Google Assistant
• Scheduling and scenes
• Single-pole and 3-way compatible
• Matches Brilliant Control design

Troubleshooting

• Dimmer not responding: Check WiFi connection. Verify neutral wire connected.
• Flickering: Adjust minimum brightness. Check LED bulb compatibility.
• Motion sensor issues: Adjust sensitivity in app settings.
• Not syncing with Brilliant Control: Ensure both on same WiFi network and Brilliant account.