Installing Your Govee Outdoor String Lights (96ft)

What's in the Box

Your Govee Outdoor String Lights (96ft) package includes 96 feet of outdoor string lights, a control box, a power adapter, mounting hooks, and a quick start guide. This extended-length string is designed to cover large outdoor areas such as expansive patios, full backyard perimeters, event venues, and commercial outdoor dining spaces. The lights are weather-resistant and rated for year-round outdoor use.

Prerequisites

• A smartphone with the Govee Home app installed (available on iOS and Android)
• A stable 2.4GHz WiFi network that reaches the outdoor installation area
• A Govee Home account created and verified
• A GFCI-protected outdoor power outlet within reach of the power adapter
• Mounting hooks, guide wire, or a cable support system for the full 96-foot span
• A ladder and a helper for safely installing lights at height over long distances
• Dry weather conditions during installation

Planning Your Layout

With 96 feet of string lights, careful planning is important to avoid wasting length or creating uneven drapes. Measure your intended route and sketch a layout, noting where you will place mounting hooks or support points. For a classic zigzag pattern across a patio, plan parallel runs about 6 to 8 feet apart. For a perimeter installation, measure the total distance along your fence line or roofline. If the 96-foot length exceeds your needs, you can loop the excess back along the same route or create a denser pattern in a smaller area.

Step-by-Step Installation

1. Install mounting hooks at all planned attachment points before handling the string lights. Use cup hooks for wood, adhesive hooks for vinyl or aluminum, and masonry anchors for brick or concrete. Space hooks every 8 to 10 feet to prevent excessive sag, and place hooks at every corner or turn.
2. For long unsupported spans, consider running a guide wire or cable between the attachment points first, then attaching the string lights to the wire with cable ties. This prevents the weight of the 96-foot string from pulling individual hooks loose.
3. Starting at the control box end near your power outlet, drape the string lights along your planned route, hooking them at each attachment point. Allow a gentle, even drape between support points for a polished look.
4. Secure the string at each hook with a wrap or clip to prevent wind movement from sliding the string out of position.
5. Position the control box in a sheltered location near the power outlet, protected from direct rain exposure.
6. Plug the power adapter into a GFCI-protected outdoor outlet.

App Pairing

1. Turn on the lights by powering on the control box. The indicator light will begin flashing to signal pairing readiness.
2. Open the Govee Home app and tap "+" to add a new device.
3. Select the Outdoor String Lights from the device list or scan the QR code.
4. Enable Bluetooth on your phone, stand near the control box, and follow the pairing prompts.
5. Connect to your 2.4GHz WiFi network when prompted. For long outdoor runs, verify that your WiFi signal is strong enough at the control box location.
6. Name the lights based on their location, such as "Backyard String Lights" or "Patio Perimeter."

Smart Home Integration Tips

The Govee Outdoor String Lights work with Alexa and Google Assistant for voice control. Set up daily schedules in the Govee Home app to turn on at sunset and off at a specific time. Use the app's scene modes to change the ambiance for different occasions, from warm white everyday lighting to colorful party modes. If you have multiple Govee outdoor products, group them together in the app for synchronized control across your entire outdoor lighting setup.

Quick Troubleshooting

If the lights flicker or lose connection, check that the WiFi signal is adequate at the control box location. A WiFi range extender may be needed for installations far from your router. If the string sags excessively between hooks, add intermediate support points. For installations in windy areas, use cable ties at each hook rather than simply draping the string over them. If the control box does not power on, verify the outlet has power and the GFCI has not tripped. Reset the GFCI outlet and try again.