Installing Your Innr Outdoor Smart Pathway Light (3-Pack)

What You'll Need

• Innr Outdoor Smart Pathway Light (3-Pack)
• Innr Bridge or Philips Hue Bridge
• Outdoor power outlet
• Smartphone with Innr or Hue app
• Ground stakes (included)

Step-by-Step Setup

1. Plan pathway: Mark locations for lights along walkway.
2. Install stakes: Push ground stakes into soil at each location.
3. Attach pathway lights: Secure bollard lights onto stakes.
4. Connect cables: Link lights together with provided cables.
5. Connect power supply: Attach cable run to 24V power supply.
6. Plug in: Connect to outdoor outlet.
7. Add to bridge: Search for new lights in Innr or Hue app.
8. Create zone: Group pathway lights for unified control.

Key Features

• Elegant bollard design
• Works with Philips Hue system
• IP65 weatherproof
• Low-voltage installation
• Dimmable
• Tunable white or color options
• Zigbee 3.0 compatible
• Scheduling via app

Troubleshooting

• Light not discovered: Reset by cycling power 5 times rapidly.
• Uneven brightness: Check all cable connections are secure.
• Ground too hard: Water soil to soften before installing stakes.
• Won't pair with Hue: Ensure using Hue Bridge v2 (square). V1 has limited third-party support.