Skip to main content
What You'll Need
- Lockly Secure Pro Deadbolt
- Secure Link WiFi Hub (included)
- Phillips head screwdriver
- 4 AA batteries (included)
- Smartphone with Lockly app
- 2.4GHz WiFi network
Step-by-Step Setup
- Download Lockly app: Install from App Store or Google Play.
- Remove existing deadbolt: Unscrew and remove your current lock completely.
- Install the latch: Insert the new deadbolt latch with the proper orientation.
- Mount exterior assembly: Position the PIN Genie keypad/fingerprint assembly outside.
- Battery prep: Ensure thumb turn faces up and deadbolt is extended (locked position).
- Install batteries with programming: Insert 3 batteries. Hold PROGRAM button while inserting 4th battery until rapid beeps - this auto-programs door orientation.
- Secure interior assembly: Attach the interior unit with mounting screws.
- Open Lockly app: Add a new device and follow pairing instructions.
- Set up WiFi Hub: Plug in the Secure Link hub and connect it in the app for remote access.
- Register fingerprints: Add fingerprints for each household member.
- Create access codes: Set up your PIN codes using the app.
Key Features
- PIN Genie keypad - numbers shuffle after each use to prevent code guessing
- 3D biometric fingerprint sensor
- Offline access codes - work without WiFi
- Built-in WiFi with included hub
- Voice control with Alexa and Google
- Auto-lock feature
- Physical key backup
- 24/7 lifetime technical support
Troubleshooting
- Bluetooth pairing timeout: After 10 minutes, tap "BL" on keypad to re-enable pairing mode.
- PIN Genie confusing: Toggle to fixed mode by holding OK button for 3 seconds, or disable Random Mode in app.
- Fingerprint fails: Re-register finger from multiple angles. Ensure sensor is clean.
- WiFi Hub offline: Check hub power and WiFi connection. Re-pair if needed.